PRO 36
€799.99*
The PRO-36 drill is used for drilling holes up to 36 mm in diameter and up to 51mm deep with core drills. The electromagnetic stand fixes the drilling machine on ferromagnetic surfaces. This ensures the correct operation of the drill and the safety of the operator. The strap protects the drill from falling in case of loss of fixation. The optional vacuum pad allows the drill to be attached to flat, non-ferromagnetic surfaces Ultra-light weight gear box and slide system as one unit Purpose-built motor with heavy-duty gear box Easy-to-maintain or maintenance-free rail guide system The PRO-36 is equipped with a magnetic field shape control (MFSC) and magnetic force adhesion module (MPAC). This unit senses the holding force of the electromagnetic base and protects both operator and machine from working on workpieces that are too thin.
PRO 36AD
€1,399.99*
The PRO-36 AD drill is used for drilling holes up to 36 mm in diameter. It allows drilling up to a depth of 20 mm with HSS core drills or up to a depth of 30 mm with TCT core drills. The electromagnetic stand fixes the drill on ferromagnetic surfaces. This ensures the correct operation of the drill and the safety of the operator. The strap protects the drill from falling if the attachment is lost. The optional HSS quill assembly allows you to drill holes up to 25 mm deep using HSS core drills or twist drills with a 19 mm Weldon shank
PRO 36 T3
€1,449.99*
The machine is equipped with an electromagnetic base. It is particularly suitable for steel profiles from 3 mm. The unique design of the magnet enables optimal distribution of the magnetic field, so that the holding force is comparable to that of a base twice as thick. Motor speed (under load) 350 rpm Power 1020 W Weight 11 kg Max. milling capacity 36 mm Max. countersinking 40 mm Stroke 70 mm Max. cutting depth 51 mm Voltage 1~ 110–120 V, 50–60 Hz 1~ 220–240 V, 50–60 Hz MFSC (magnetic field shape control) yes Magnetic clamping force 918 kgf (9 000 N) Dimensions of magnetic base 100 mm × 200 mm × 38 mm Min. workpiece thickness 3 mm Profile thickness 3 - 6 mm Pay attention to full surface support Tool holder 19 mm (3/4’’) Weldon product code 110–120 V, 50–60 Hz WRT-0440-10-10-04-4 Product code 220–240 V, 50–60 Hz WRT-0440-10-20-04-4
PRO 36 MS
€1,999.99*
The machine with swiveling magnetic feet is designed for operation with convex (min. diameter 300 mm) and concave (min. diameter 1000 mm) materials. The magnetic feet are equipped with very strong neodymium magnets and does not require electricity for operation. Four individual swivel magnets adapt to the surface, so the machine does not require perfectly flat material. In addition, each magnet is equipped with a variable holding force. This allows for easy positioning of the machine while the magnets are partially engaged. The magnetic base does not require any power, providing greater safety in the event of a power failure.
PRO 36 PM
€2,449.99*
The machine is equipped with a permanent magnet, providing safety during power outages. The magnetic base is equipped with very strong neodymium magnets and does not require electricity for operation. The switchable holding force allows easy positioning while the magnetic foot is partially engaged. Motor speed (under load) 350 rpm Power 1020 W Weight 13 kg Max. milling capacity 36 mm Max. countersinking 40 mm Stroke 70 mm Max. cutting depth 45 mm Voltage 1~ 110–120 V, 50–60 Hz 1~ 220–240 V, 50–60 Hz MFSC (magnetic field shape control) - magnetic clamping force 612 kgf (6 000 N) Dimensions of magnetic base 98 mm × 237 mm × 100 mm Min. workpiece thickness 5 mm Tool holder 19 mm (3/4’’) Weldon product code 110–120 V, 50–60 Hz WRT-0440-10-10-06-4 product code 220–240 V, 50–60 Hz WRT-0440-10-20-06-4
PRO 52T
€2,695.35*
The PRO-52T drilling machine is used for drilling holes up to 50 mm in diameter with core drills or holes up to 23 mm in diameter with twist drills. With this drilling machine, the direction of rotation can be changed. This allows thread cutting with a chuck. The electromagnetic stand fixes the drilling machine on ferromagnetic surfaces. This ensures the correct operation of the drill and the safety of the operator. The belt protects the drill from falling in case of loss of fixation. When the brushes are worn out, the drill turns off automatically. Accessories allow drilling in pipes, tapping and attaching the drill to flat, non-ferromagnetic surfaces.
